DigiPlus Philippine

List of the contents of this article:

• 1, How to install the computer system
• 2、Computer System Installation Steps
• 3,DigiPlus PhilippineSteps for computer installation system

How to install computer system

System disk (system CD-ROM, system All USB flash drives are all acceptable) plug into the computer. Set the BIOS to restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS. After the boot system is restarted, the system starts from the system disk, and the installation is normal after booting.

Insert the CD and start the computer: Insert the system CD into the optical drive in time when restarting the computer.

Laptops are generally the best systems of the original generation of the factory. After being tested and optimized by the manufacturer, they are most suitable for local use. If you download it by yourself, try to choose the system matched by the manufacturer. Although the original pure installation version of the original pure installation version is good, although the comprehensive installation has comprehensive functions, the hardware driver needs to be installed after installation.

There are many ways to install computer systems, including CD-ROM installation method, USB disk installation method, hard disk installation method, etc. This article will introduce the steps of installing the hard disk system.

Prepare the installation media: First, you need to prepare an operating system installation CD or an installation USB flash drive that can be used for installation. Make sure that the installation media is legal and reliable.Backup important data: Before starting the installation, it is recommended that you back up and store important personal data to prevent data loss.

If you want to reinstall your computer's operating system, you need to prepare an installation disk, usually a DVD or a USB flash drive. Next, you can follow these steps to reinstall: prepare the installation disk, insert the installation disk into the computer, and then start the computer.

computer system installation steps

Insert the system disk (system CD-ROM and system USB disk) into the computer. Set the BIOS to restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS. After the boot system is restarted, the system starts from the system disk, and the installation is normal after booting.

If you want to install xp, then fill in the serial number first (it is recommended that you use the genuine system to install), select the installation partition, and then choose which partition to install. In the future, as long as you take the next step continuously, you can fill in the information. Fill in your information where you should fill in your information, install the system and install the software. It's all very simple.

There are many ways to install the computer system, including CD-ROM installation method, USB disk installation method, hard disk installation method, etc. Today, I will focus on the method of hard disk installation system.

Steps for computer installation system

1. Backup important data: Before reinstalling the system, you first need to back up important data, such as documents, photos, music, etc., to avoid loss in the process of reinstalling the system. Prepare the installation disk: Choose a suitable operating system installation disk, which can be a CD-ROM or a USB flash drive. If there is no installation disk, you can download it from the official website.

2. After inserting the USB disk of the win10 system disk, restart and press ESC to select the USB disk to install the win10 system. The product line is different, and the shortcut keys to enter the startup item are different. Press ESC for ASUS notebooks, and press F8 for desktops or motherboards.

3. You need to use software to make a USB disk into a boot disk, insert the USB disk, insert the USB disk boot disk into the computer that needs to reinstall the system, restart the computer and press the USB disk boot shortcut key when the first screen appears, call up the shortcut boot menu, press the arrow key and return key to select your own USB disk name to enter Go to the PE selection interface and redo the system.

4. Step 1: Enter the bios and press del. After entering the bios, select the second one in the first vertical line and press Enter. Step 2: Set up the power-on check optical drive, select first boot device, select CD-ROM, press F10, select Y, and click return.