European Cup live

List of the contents of this article:

• 1, How much is the Fengfan engine guard
• 2, Can Honda Fengfan add an engine guard?
• 3、front engine guard is killed
• 4, What is the difference between Fengfan PC alloy lower guard plate and metal lower guard plate?

How many Fengfan engine guardsLess money

Good afternoon, if this car is equipped with an engine guard, you can choose aluminum-plastic or titanium-magnesium alloy, generally about 200 yuan, one place, one price for reference only.

yuan. The engine guard is an engine protective device designed according to the fixed body of various different models, which is installed under the engine. According to the relevant information of the query, the engine wrench installation of Dongfeng Fengxing brand in the market can be purchased for at least 84 yuan. Its design is first of all to prevent dirt from wrapping the engine, resulting in poor engine heat dissipation.

Hello. A set of engine assembly costs more than 20,000 yuan. It's a pleasure to answer your question.

Hello, of course, this can be added. You can go directly to the repair shop to add a piece. The general cost is about 150 yuan.

The material of the engine guard plate is different, and the price will also be different. The plastic guard plate is about 150 yuan, the aluminum alloy guard plate is about 300 yuan, and the steel and plastic steel engine guard plate are generally between 100-150 yuan. Car owners can choose the engine guard plate reasonably according to their own needs.

-700 yuan. The price of the engine guard depends on the material. There are 4 types of engine guards on the market, namely steel, aluminum alloy, plastic steel and plastic, etc.

Can Honda Fengfan add an engine guard?

The new Honda Vanguard model is not equipped with an engine guard plate from the factory, but the car generally does not need to be equipped with an engine guard plate if the driving conditions are not very bad.

The sound insulation effect is not very big, personally. The engine guard has also been installed. If so, it is installed for fear that the engine cannot sink in the event of a crash and injure the people in the car. But if I don't install it, I'm afraid of bumping the engine. I installed it because my car chassis bumped 8. It depends on your situation. Just pretend if you think it's necessary.

Good afternoon, if this carIf you want to install the engine guard, you can choose aluminum-plastic or titanium-magnesium alloy, generally about 200 yuan. The price of each place is for reference only.

If you really don't want to disassemble it, you can try to reduce the noise of the noise source engine itself. There is something called American multi-path film that may help you. Many friends use multi-path film to greatly reduce the engine noise, but there is no protective plate. You added a protective plate. How effective it is depends on your luck.

The Fengfan engine guard is killed

Hello, how to choose the fixation when the engine of the car falls off? First of all, our fixation is generally fixed by screws. Well, if it falls off, you can fix it directly with our wire, butThe words in the middle cannot be left. There is a gap. If there is a gap, it will resonate, thus causing abnormal sound.

If the chassis is rusty, protective measures such as rust prevention and spraying protective paint should be taken. Secondly, the chassis system is densely piped, and key parts such as the gearbox engine are installed at the same time. If there are conditions, the chassis guard can be installed on the vehicle. In addition, the suspension structure in the chassis is also the focus of maintenance.

It is still very important that the plastic engine guard plate falls off. Without the guard plate, it cannot effectively prevent debris such as water and mud on the road from entering the engine compartment.

If the guard of the engine falls off and drag it, it will cause inconvenience to the surrounding road participants. It is best to call the rescue number and wait for the rescue vehicle to tow the car to the maintenance center for repair. If you must tow the car, you need to make sure that it will not affect the use of the engine.

If the engine shield is damaged or lost in the later stage, you can buy it from a 4S store or repair shop. The chassis guard is an engine protection device designed according to different models. Its design is firstly to prevent dirt from wrapping around the engine, and secondly to prevent damage to the engine due to the impact of uneven road surface during driving.

What is the difference between Fengfan PC alloy lower guard plate and metal lower guard plate?

1. The advantage of the metal guard plate is that it is easy to repair and has stronger protection. Some car owners will choose metal guard plate when installing the guard plate under the car. The advantage of the metal guard plate is that it is relatively high. Compared with the plastic guard plate, it is not easy to cause bumps when driving on some complex road sections. Loss.

2. Aluminum alloy protective plate: Aluminum alloy wing plate is recommended by many decoration shops. The price can be the same as that of steel wing plate, but in terms of publicity, it will be said that it is lighter than steel wing plate and will not cause an increase in fuel consumption. In fact, it is the high profit behind its high price. The relative hardness and hardness of aluminum alloy are far inferior to that of steel sheath.

3. Different materials have different prices, ranging from tens of yuan to hundreds of yuan. Hard plastic and resin lower guard plate. The price is relatively cheap, the production process is simple, and there is no need for a large amount of capital and high-value equipment. The entry threshold for the production of this kind of guard is low.

4. First of all, the plastic bottom plate. Most of the original engine shields of different models are plastic shields.

5. Aluminum alloy is lighter than iron, and the fuel consumption is naturally smaller than iron. However, the hardness is not as good as iron. Once the ground is heavy, it may still hit the engine oil san.

6. For the engine lower guard, it is generally recommended that you choose manganese steel plate, mainly to prevent chassis contact. If you want a lighter quality, you can choose aluminum-magnesium alloy.