Casino free 100 no deposit

Engine oil diper (the function and Casino free 100 no depositusage of the engine oil diper) When you own a car, whether it is a new car or a used car, it is necessary to understand the basic knowledge of vehicle maintenance. Among them, the quality and filling status of automobile oil is one of the important guarantees for the normal operation of the engine. The engine oil diper is a tool to detect and maintain the quality and oil filling state of the engine. Next, let's talk about the function and usage of the engine oil diper. I. What is an engine oil dicer? The engine oil gauge is a tool specially used to measure the height of the engine oil level. It is generally made of plastic, steel plate or steel pipe and other materials. The specific shape and design will vary according to different models of cars and different engine designs.But their working principle and usage are similar. II. The function of the engine oil dimeter 1. When the engine oil liquid level is detected, when the engine is running, the oil will be applied to various parts by the fuel injection pump through the engine oil route to form a lubricating film, which in turn plays the role of reducing friction and wear. However, the oil will also naturally evaporate in the engine or be taken away by combustion, so the engine oil scale is used to detect the height of the oil level. If the oil level is too low, you need to add new oil in time. Two. Ensure that the engine oil line is unobstructed. When using the engine oil scale, it will be inserted into the engine oil sap, and the height of the oil level can be felt at this time. If the oil level is too low or too high, it will have a bad impact on the engine. If the oil level is too low, the oil pump will inhale, causing the oil route to be disconnected or the oil cannot be pumped;If the oil liquid level is too high, the oil in the oil sap will form a "gnawing edge" phenomenon with the crankshaft, resulting in the whipping phenomenon of the oil. III. How to use the engine oil dicator? It is not too difficult to use the engine oil differ. The following is a brief introduction to the usage process: 1. Find the position of the oil scale, open the front hood or rear hood of the vehicle, and find the position of the oil scale. Generally speaking, there is a mark on the hood when the oil meter is inserted, and the hood can be opened when in use. Two. Insert the oil diper into the oil sedimentation shell, and then slowly take out the oil diper. Be careful not to pop up the ruler. 3. To detect the height of the oil level, there is a ruler on the oil ruler, which can be used to record the height of the oil level. After taking out the oil scale, check whether the liquid level height recorded on the ruler meets the requirements.If the liquid level height recorded by the ruler is too low, new oil needs to be added. In a word, the position of the engine oil diger in automobile maintenance cannot be ignored. It is an important tool to ensure the smooth operation of the engine oil line, the quality of the engine oil and the oil filling state. It can provide us with the oil filling status of the vehicle and the necessary maintenance advice. Therefore, car owners should often check the height of the oil level to improve engine protection and extend the service life of the engine.

Contact Us
Phone：020-83484601