UEFA Champions League

The UEFA Champions Leaguemethod of replacing the engine hanger will wear and be damaged during the use of the vehicle over time and the frequency of use. The engine hanger is an important component connecting the engine and the car body. Its damage will cause the engine to vibrate and make noise, and even affect driving safety. This article will introduce the method of replacing the engine hanger. 1. Prepare tools and materials to replace the engine hanger. The tools and materials required are as follows: tools: wrenches, wrenches, jacks, brackets, power tools, pallets, lighting equipment. Materials: new engine hangers, professional tools and lubricants. Two. Protective measures Before replacing the engine hanger, take protective measures first. First of all, make sure that the vehicle is safely parked on the hard ground, pull the handbrake and dial the parking gear, and wear gloves and glasses.3. It is very important to locate the damaged hanger. Check the fixing bolts of each hanger and look for obvious signs of damage, such as bending, tearing or cracking. Before replacing the engine hanger, it is recommended to check at least all the fixing bolts and brackets of the hanger. Four. Remove the old engine hanger. Before removing the old engine hanger, you need to fix the engine bracket to the bracket. Remove all the fixing bolts and nuts and use a jack to gently lift the engine away from the bracket. When removing the old engine hanger, be careful to keep the oil leak. You can put the tray under the engine to store the liquid during the disassembly. 5. When installing a new engine hanger, you should pay attention to the following points when installing a new engine hanger: 1) Make sure you have the correct replacement parts. 2) Clean up the working area. Cleaning the working area can reduce dust and debris entering the engine chassis.Remove the residue and wipe the working area. 3) Use lubricating oil for maintenance. When installing a new engine hanger, an appropriate amount of lubricant should be used. Most new engine hangers will have a lubricating interface that has been lubricated. 4) The fixing bolt that fixes the hanger. Before selling the new engine hanger, make sure that these bolts have been coated with exposed bolts. 5) Gently lift the engine. When someone operates the jack for lifting, attention should be paid to the force exerted by the transverse anti-skid block around the connection point to ensure that the entire new engine hanger for sale is stably installed in its original position. 6. After testing and adjusting the installation of a new engine hanger, it needs to be tested and adjusted. After the car cools down, start the car, conduct a simple road test, and check the effect of the hanger. If the hanger still cannot support the engine accurately and stably, the adjustment may involve the frame of the vehicle.7. Final step If your engine hanger replacement is successfully completed, you can take the final step before restarting your car. Finally, please check the following items: 1) Check the alignment status of the wheels 2) Check the level of engine coolant 3) Check the level of engine oil 4) Check the level of other liquids (brake fluid, booster pump fluid, transmission fluid, etc.) In short, in any case, if you find something wrong with your vehicle and engine, The problem must be solved immediately. Replacing the engine hanger may be one of the best ways to solve these problems. If you are not sure whether you can install the engine hanger correctly, please consult a professional technician for help.

Contact Us
Phone：020-83484601