Bingo Plus stock

List of the contents of this article:

• 1, What is the function of the car water tank
• 2, What is a car water tank (what is a car water tank boilingPot)
• 3、How to judge the leakage of the car water tank

What is the function of the car water tank

1. The car water tank, also known as radiator, is the main part of the car cooling system; the function is to dissipate heat and cool water It absorbs heat in the water sleeve. After flowing to the radiator, the heat dissipates, and then circulates back into the water sleeve to achieve temperature regulation. It is an integral part of the car engine.

2. [Pacific Automobile Network] The function of the car water tank is to absorb the heat of the cylinder block and prevent the engine from overheating.When the temperature of the coolant rises, the water level will rise, and the coolant that cannot be loaded in the tank will flow back to the expansion tank to prevent the pressure of the tank from being too high, and on the contrary, it will replenish the water level of the tank.

3. The car water tank, also known as the radiator, is a cooling system whose main function is to help the car cool down. The function of the cooling system is to emit the excess and useless heat of the engine, so that the engine can run at room temperature at various speeds or driving conditions.

4. The main function of the water tank is to reduce the temperature of the engine through circulating water to keep the engine within the normal operating temperature range. The car water tank usually consists of two parts, one is the water tank itself and the other is the radiator.

5. The water tank of the car is not filled with tap water, but antifreeze, which cannot be replaced by tap water.

6. Introduction to the function of the car water tank: Function The function of the cooling system is to dissipate the excess and useless heat of the engine, so that the engine can work at room temperature at various speeds or driving conditions. The water tank is the heat exchanger of the water-cooled engine, which maintains the normal working temperature of the engine through air convection cooling.

What is a car water tank (what is a car water tank boiling pot)

1. What is a car water tank (what is a car water tank boiling pot) Car water tank is also known as a radiator or an overflow tank, which is a water-cooled start An important part of the machine is the heat exchanger of the water-cooled engine, which maintains the normal operating temperature of the engine by air convection cooling.

2. OpenThe pot means that the water temperature of the water tank reaches 100 degrees Celsius, the water begins to boil, and the water comes out of the lid of the water tank, which is the boiling pot. Usually, it is only when there is a problem with the engine or the oil problem that the water tank will boil.

3. "Boil pot", in automobile terminology, refers to the cooling water in the engine tank that reaches the boiling point, that is, the water inside is boiled into boiling water. Long-term water circulation will cause water to be slowly lost, resulting in a lack of water in the water tank. If water is not checked and added in time, it is easy to cause the water tank to "boil".

4. The boiling of the water tank of the car refers to the excessive water temperature in the cooling system of the automobile, resulting in the vaporization of the water in the water tank and the formation of bubbles, resulting in excessive pressure in the water tank, and even bursting. This situation is generally caused by the following reasons: insufficient water in the cooling system, and the lack of coolant will cause the engine temperature to rise.

How to judge the leakage of the car water tank

1. Check whether the water tank is closed: Sometimes the water tank cover will be loose because the car often bumps. If it is checked normally elsewhere, check whether it is loose. Check whether there are traces of emulsification in the engine oil: open the engine oil cover, and if there are traces of emulsification in the oil, replace the engine cylinder pad.

2. Add water to the water tank. Fill the vehicle tank with water, wait for a period of time, observe whether the liquid level drops, and then observe whether there is water on the ground of the parked vehicle. If the liquid level drops or there is water on the ground, it means that the water tank is leaking and needs to be repaired in time. The water tank is filled with gas.

3. If the car determines that the water tank is leaking, first check whether the water tank cover has been fastened, and try to fill the gas in.Water tank, see where the water in the tank seeps out when it is under pressure, unscrew the lid of the engine oil to see if there are traces of oil emulsification. If so, disassemble the engine and replace the cylinder pad.

4. Inspection method for water leakage in the car water tank: first, check whether the water tank is tightly closed, check whether the oil has emulsification marks, check whether the water tank hose is leaking, then check whether the quality of the water tank is good enough, and finally check whether the water tank hose joint is leaking. Check whether the water tank is closed. Sometimes, because the car often bumps, the water tank cover is loose.

5. The performance of water leakage in the car water tank is that the engine temperature is too high, resulting in serious mechanical accidents such as insufficient power, increased wear, damage to the cylinder pad, and even burning tiles and pulling the cylinder. Possible causes and solutions for water leakage in the car water tank: The water tank cover is not tightened, just tighten it.

6. Add water to the tank, fill it up, and then check for a few hours to see if there is any water in the ground. Another way is to check the repair shop on the elevator. It may be a pipe leakage. Please ask the repairman to check it. Before deciding on the repair plan, try to pour gas into the water tank, see if it oozes out, and then decide on the repair plan.