European Cup live

Engine connecting rod is European Cup liveone of the most important components in the engine. Its function is to convert the piston movement into the crankshaft rotation movement, so as to drive the vehicle. The engine has been running.During the process, the engine connecting rod is subjected to great pressure and load, so its maintenance is particularly important. The structure of the engine connecting rod The engine connecting rod is usually composed of a connecting rod cover, a connecting rod body, a gear shaft and a spring clamp. Among them, the connecting rod cover consists of two parts, which are connected by bolts, covered with the connecting rod body, and the lubricating oil is injected through the oil hole. The connecting rod body is made of high-strength steel, which, together with the crankshaft and piston, constitutes the three core parts of the engine operation. The gear shaft is a rotary shaft used to drive auxiliary components such as camshafts, oil pumps and water pumps, while the spring clip is used to connect the connecting rod body and the gear shaft. The function of the engine connecting rod The engine connecting rod is a component that connects the piston and the crankshaft. It drives the vehicle by converting the piston's up and down reciprocating movement into the crankshaft rotation. In the engineDuring the operation, the engine connecting rod carries a great pressure inside the engine, so it must have extremely strong rigidity and toughness. In addition, the engine connecting rod also needs to withstand the impact of instantaneous high temperature and high pressure, so there are strict requirements for the selection of materials and manufacturing processes. Maintenance of engine connecting rods Maintenance of engine connecting rods is particularly important, which can not only extend the service life of the engine, but also improve the performance of the engine. The following are some common engine connecting rod maintenance methods: 1. Replacing the engine lubricating oil is very important to ensure the normal operation of the engine connecting rod, so it is necessary to replace the lubricating oil regularly. Replacing the lubricating oil according to the requirements of the manufacturer can effectively reduce the wear of the engine and extend the life of the engine. Two. If abnormal noise is found, deal with it in time. When it is found that the engine connecting rod makes abnormal noise during operation, it should be checked in time to find out the cause and take effective measures.Common abnormal noises include bursting sound, metal impact sound, rolling sound, etc. 3. Check the connecting rod bolt. The engine connecting rod connects the piston and the crankshaft together, and its bolts carry a great impact force, so the fastening of the bolts should be checked regularly. If the fastening force is insufficient or defective, it should be replaced or tightened in time. Four. Regular replacement of accessories Engine connecting rods need to be replaced regularly, such as connecting rod bearings, spring clips, etc. The damage of these accessories will directly affect the performance and service life of the engine. The importance of the engine connecting rod cannot be ignored. As one of the core components in the engine, the importance of the engine connecting rod cannot be ignored. Only when the engine connecting rod is working normally can the engine run continuously and stably. Therefore, we should pay attention to the maintenance of the engine connecting rod, find and deal with possible faults and problems in time, and ensure the healthy operation of the engine.

Contact Us
Phone：020-83484601