UEFA Europa League

List of contents of this article:

• 1,UEFA Europa League< A href='# What should I do if the laptop can't enter the system when it is turned on?' title='What should I do if my laptop can't be turned on and can't enter the system?' > What should I do if the laptop can't enter the system when it is turned on?
• 2, What should I do if the laptop can't enter the system when it is turned on?
• 3, The original reason why the laptop can't be turned onBecause and solution
• 4, The laptop can't start up and enter the system
• 5, What should I do if the laptop can't start?

What should I do if the laptop can't enter the system when it is turned on?

When the computer cannot enter the system when it is turned on, it may be a graphics card problem. Of course, it also includes other chassis hardware, such as memory stick sound card, etc. The first thing we need to do is to check whether these hardware is plugged in. You can unplug it again, clean it up and plug it back in.

It is recommended to try system repair: First, enter safe mode and remove the recently installed drivers/software. 1 Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

Reset BIOS settings: Try to reset the BIOS settings of the computer. You can restart the computer by removing the CMOS battery (usually a button battery) on the computer motherboard, waiting for a few minutes before reinserting the battery, and then restarting the computer.This will restore the BIOS to the default state, which can sometimes solve the startup problem.

The laptop can't enter the system. You can try this operation: restart the computer, press F8 to enter at startup, and select the last correct configuration to enter in the interface that comes out. In this way, it is possible to enter the system.

What should I do if the laptop can't enter the system when it is turned on?

Solution: If you want to solve the problem, it's very simple. Just unplug the USB flash drive or external device and try to turn it on. The internal lines of the computer are aging or poor contact. The computer cannot be turned on and cannot enter the system. It may also be due to the aging of some data cables, power cables and other lines, and poor contact.

System file damage If the Windows system file is damaged, the computer may have repeated startup problems. You can try to use the Windows installation disk or the system recovery partition to repair it.

You can enter the safe mode for antivirus. You can check the BIOS of the laptop to see if there are errors in reading, writing and damage. Reinstalling the system is also a quick way to solve the problem that the computer cannot enter the system when it is turned on.

Try to try to repair the system or detect and troubleshoot hardware failures according to the following general solution from soft to hard. Please refer to: Shut down the power first, then open the host box, unplug the power cord and data cable of the hard disk, and then plug it in after 2 minutes and restart it.

Start safe mode: try to enter the safe mode of the computer.Press the F8 key (for Windows system) or Command + S key (for Mac system) many times during the power-on process to select to enter the safe mode. If you can successfully enter the safe mode, it may be caused by some software or driver.

It may be that the 0 magnetic track of the hard disk is damaged, and sometimes you can enter the system with the reset key or CTRL+ALT+DEL several times. It is recommended to reinstall the system, otherwise this problem will often occur in the future.

The reasons and solutions for the laptop can't turn on

1. The solution is as follows: Reason 1: Battery and power supply problems Check all cables (including power plugs) to ensure that all The equipment is properly and tightly connected together.

2. There are three reasons why the notebook does not turn on: first, remove all the battery and power adapter, press and hold the switch button for 30 seconds to light up the static electricity, wait for about 15 minutes, and then connect the power adapter separately to power on; if it still can't be turned on, what are the following reasons?

3. The black screen of the laptop can't be turned on may be caused by these reasons: first, the power adapter of the notebook is damaged and cannot be charged normally; second, the memory slot in the notebook is in poor contact; third, the graphics memory of the notebook graphics card is poorly soldered.

4. If the laptop can't be turned on, won't turn on/can't turn on, this problem may be caused by static electricity on the motherboard. For this situation, please follow the steps below. Please plug in and unplug the adapter and battery.

The notebook cannot start into the system

Hardware problems: Problems with the internal hardware of the computer may also cause the computer to fail to start the system. For example, poor memory, damage to hard disk, failure of motherboard, etc. System file damage: If there is a problem with the system file of the computer, it may cause the computer to fail to start the system.

The reasons why Dell notebooks can't start and enter the system are: power failure, system crash, hardware failure, startup item setting error, and virus infection. Power failure: Problems with the power supply of Dell notebooks may cause failure to start. You can try to replace the power cord, reset the power supply, or check whether the power supply is working properly.

Check hardware failure: Sometimes the computer cannot start normally after turning on, which may be caused by hardware failure.Check the hardware components inside the computer, such as memory sticks, hard disks, graphics cards, etc., to ensure that they are installed correctly and not loose or damaged. Reset BIOS settings: Try to reset the BIOS settings of the computer.

What should I do if the laptop can't start?

Check the power supply and battery: Make sure that the power supply and battery of the laptop are connected properly.Turn off the laptop and restart it to see if there is any improvement. Check the power management settings: Some power management settings may cause the laptop to fail to start.

This article will introduce the reasons and solutions why the laptop cannot be turned on. The power supply is insufficient. The power supply of the notebook is insufficient. This situation is caused by excessive use of notebooks or excessive use of standby batteries for a long time. As long as you charge more before use, you will solve this problem. There is no reflection when the hardware is loose or the water enters the power on.

Turn on the machine and re-tighten the memory, graphics card, hard disk and other devices. Motherboard failure The mainboard failure is the main reason why the laptop cannot be turned on. It is often caused by factors such as liquid in the notebook, broken down, and damaged components of the motherboard itself.

If the laptop cannot be turned on, it cannot be turned on/cannot be turned on, the problem may be caused by static electricity on the motherboard. For this situation, please follow the steps below. Please plug in and unplug the adapter and battery.