TNT Sports

List of the table of contents of this article:

• 1、 What is the working principle of the aircraft turbine engine?
• 2, The working principle of automobile engine (illustration)
• 3, What is the working principle of the motorcycle engine?
• 4、 What is the working principle of the engine?

What is the working principle of the aircraft turbine engine?

The principle of a turbine aircraft engine is to ignite the compressed gas and burn the gas into high-temperature gas to take off. The compressor is composed of multi-stage blades, which are used to inhale and compress the inhaled air step by step, turning the air into high-pressure gas and sending it to the combustion chamber.

Turbine disk is the core component of modern aircraft engines. It is driven by high-temperature gas in the engine combustion chamber, converting the thermal energy of gas into mechanical energy and driving the operation of the engine.

The working principle of the turbojet engine: The structure of the turbojet engine is composed of an intake duct, compressor, combustion chamber, turbine and tail nozzle, and there is also a power combustion chamber between the turbine and tail nozzle of the fighter.

The pulsed jet engine adopts the principle of intermittent combustion. Unlike the stamping jet engine, it can work in a stationary state.This engine is composed of an aerodynamic culvert similar to a stamping jet engine. It has high pressure and a relatively solid structure.

The working principle of automobile engine (illustrated)

1, the working principle of engine 1. Intapt stroke When the intake valve opens and the exhaust valve closes, the piston moves from the upper stop to the lower stop. The volume of the cylinder above the piston increases, resulting in a vacuum degree, and the pressure in the cylinder drops below the intake pressure.

2. The working principle of the four-stroke gasoline engine is shown in the figure below. ( 1) The intake stroke sucks the flammable gas mixed with gasoline and air into the cylinder. After the intake stroke begins, the intake valve opens, the exhaust valve closes, the crankshaft rotates, the piston moves from the upper stop point to the lower stop point, the volume above the piston increases, and the pressure decreases.

3. Animation of the working principle of in-line four-cylinder engines. Most of the engine cylinders below 6 cylinders are single-row in-line, and a few 6-cylinder engines also have in-line. The in-line engine has a simple structure and a cheap price. The disadvantage is that the engine height is high and the length is long.

4. Engine structure principle The structure of automobile engines is composed of five major systems and two major mechanisms. Different mechanisms and systems use different accessories, namely: the crank connecting rod mechanism is composed of the body, connecting rod, crankshaft, flywheel and piston.

5. The internal structure diagram of the engine is shown in the figure below. The internal structure of the engine includes cylinder, piston, crankshaft, connecting rod, camshaft, valve, valve spring, intake duct, exhaust duct and other components.

What is the working principle of the motorcycle engine?

The following are the working principles of the two engines: the working principle of the two-stroke engine: the crankshaft rotates a circle and the piston goes back and forth in the cylinder to complete the intake (sweeping), compression, combustion and expansion, and exhaust. An engine with a working cycle is called a two-stroke engine.

The basic principle of motorcycle work is that the engine continuously generates heat energy. After the heat energy is converted into rotational force through the crankshaft connecting rod, the rear wheels are driven by the variable speed transmission device with rotation force. When the ground friction force is overcome, the motorcycle can be driven.

The working principle of the four-stroke engine. The four-stroke engine has a wide range of uses. The four-stroke engine means that the piston ignites the cylinder every four reciprocing movements. The specific working principle is as follows: Air intake: At this time, the intake valve is opened, the piston is down, and the mixture of gasoline and air is sucked into the cylinder.

Motorcycle engine x0dx0ax0dx0a motorcycle engine works in the same way as the car engine. The engine is composed of a piston, a cylinder block and a cylinder head, and the cylinder head contains a valve mechanism.When the spark ignites the mixture of fuel and air, it will cause an explosion, pushing the piston to move up and down in the cylinder.

Motorcycle engines are generally gasoline air-cooled engines. In the past, gasoline and air were used to form a "combustible mixture" with a vaporizer, which was compressed into the cylinder and then ignited and burned at high pressure. Because the emission does not meet the standard, it has been replaced by the electric injection system in recent years. The so-called electric injection is an electronically controlled fuel injection system.

What is the working principle of the engine?

Working principle of the engine: The engine is generally four-stroke, and its working principle includes intake stroke, compression stroke, working stroke and exhaust stroke. Most car engines are four-stroke. Air intake: As the first stroke, this is mainly the process from the piston to the lower stop point on the cylinder.

Their working principle is as follows: The working principle of gasoline engine: the four-stroke gasoline engine first mixes air and gasoline into a good mixture in a certain proportion, and then sucks the mixture into the cylinder during the intake stroke. The mixture is compressed and ignited to produce heat energy.

The working principle of automobile engines is mainly to convert chemical energy into mechanical energy. The reason why the engine has sufficient power is that it generates kinetic energy by burning the fuel in the cylinder, which makes the piston in the engine cylinder reciprocate, which is also a process of working cycle.

High-temperature and high-pressure gas acts on the top of the piston, pushing the piston to make a linear reciprocating movement, and the mechanical energy can be output outward through the connecting rod, crankshaft and flywheel mechanism. The four-stroke gasoline engine completes a working cycle in the intake stroke, compression stroke, workingstroke and exhauststroke.