Bingo Plus

Win7 sets up a local connection - allowing you to have Bingo Plusan unimpeded Internet experience Win7 is an operating system launched by Microsoft. Its network connection settings are more convenient than the early operating system. Whether you are a home user or a business user, you need to set up a network connection to connect to the Internet when using Win7.This article will introduce how to create a local connection in Win7 to make your Internet experience smooth. I. Understand the local connection. The local connection is a general network interface that allows your computer to connect to other computers, devices and the Internet. The connection uses a network adapter, also known as a network interface card (NIC). These adapters connect the computer to the existing network facilities. In Win7, you can connect the computer to the network by creating a local connection. II. Step 1 to create a local connection. Open the "Control Panel" and click "Network and Sharing Center". Two. In the "Network and Sharing Center" window, click "Change Adapter Settings". 3. In the "Network Connection" window, right-click "Local Connection" and select "Properties". Four. In "localIn the "Connection Properties" window, select "Internet Protocol Version 4 (TCP/IPv4)" and click the "Properties" button. 5. In the "Internet Protocol Version 4 (TCP/IPv4) Properties" window, select "Automatically Obtain IP Address" and "Automatically Obtain DNS Server Address". 6. Click the "OK" button, close the "Local Connection Properties" window, and restart the computer. 7. After restarting, click "Network" in the "Start" menu in the lower left corner to confirm that you have connected to the network. The above are the steps to create a local connection. If you follow the above steps, you should be able to successfully connect to the network. III. Local connection settings and network optimization 1. Set the local connection IP address, and you can use the fixed IP address or dynamic IP address.Two. Network speed optimization can improve network speed by changing TCP/IP parameters and Internet browser settings. 3. Network management software, such as network scanning, network supervision, network storage, etc., can be used to optimize the management of local connections. IV. Troubleshooting of local connection There are many reasons for local connection failure. Troubleshooting can be started from the following aspects: 1. Confirm whether the network adapter is installed correctly and working normally. Two. To confirm whether the computer is connected to the network, you can try to use the Ping command to check the network connection status. 3. Confirm whether the network settings are correct, including IP address, subnet mask, basic gateway, etc. Four. Confirm whether the network failure comes from the network environment, such as network bandwidth, network congestion, etc. The above is the setting and troubleshooting method of local connection. I hope it will be helpful to you.To sum up, creating a local connection in Win7 is the basic step to connect to the Internet. It should be noted that setting up a local connection and optimizing the network play a great role in improving the Internet speed and connection quality. It is necessary to pay attention to details and keep trying. At the same time, when troubleshooting, you must be patient and meticulous, find the problem and solve the problem, so that your computer can connect to the network smoothly.

Contact Us
Phone：020-83484601