DigiPlus Philippine

Overview of Internal Structure of Automobile Engine: Detailed Explanation of Engine Anatomy Car Engine is DigiPlus Philippineone of the most important core components of modern cars. Its internal structure design is complex, and the operating state is stable and efficient. The engine anatomy is a standardized scheme used to show the internal structure and components of the car engine. This article will explain in detail the parts shown in the anatomical diagram of the automobile engine and how to carry out daily maintenance. The car engine is mainly composed of two parts: the combustion chamber and the lubricating oil part. A combustion chamber is a space composed of multiple components used to ignite mixed gases and generate energy. The following are the parts of the combustion chamber: 1. Cylinder: The main working part of the engine, which burns finely mixed gasoline and air to produce energy.Two. Piston: Move back and forth in the cylinder at a certain rhythm and speed to transfer energy to the crankshaft. 3. Connecting rod: Connect the piston and crankshaft to convert the front and rear movement of the piston into a round-trip movement. Four. Crankshaft: Convert energy from connecting rod to rotary motion, which can drive all the power work of the car. 5. Camshaft: It is used to open and close the valve and adjust the time and rate of the entry and discharge of the mixed gas. 6. Galve: The channel for entering and discharging the cylinder to control the flow and speed of the mixed gas. In the lubricating oil part, the lubricating oil must circulate inside the engine to provide the necessary lubrication and cooling for the components. The following are the components of the lubricating oil system: 1. Oil span: Special lubricating oil used in the installation and storage of the engine. Two. Oil pump: used to transport specific lubricants to various parts of the engine.3. Oil pressure sensor: responsible for detecting whether the pressure of lubricating oil is normal. Four. Filter: Used to separate any impurities generated in the engine. 5. Oil channel: Introduce lubricating oil into other parts of the engine. 6. Radiator: It is used to prevent the lubricating oil from overheating and keep the whole system within the normal temperature range. In order to make full use of the performance of the car engine and extend its service life, it is essential to maintain and inspect all the components inside the engine in a timely manner. The following are some daily maintenance and upkeep suggestions: 1. Replace the lubricating oil and filter regularly to ensure that the quality of the lubricating oil is in the best condition. Two. Check and replace the spark plugs and timing belts of the engine to ensure that the engine is more efficient and safe when working. 3. Regularly check the crankshaft and piston to ensure that these parts are in good condition to avoid damage or wear caused by prolonged use.Four. Check and replace the valve, brake and suspension system, etc. In a word, the engine anatomy and understanding the function of each component can greatly help the maintenance and repair of the engine, and also better understand the working principle of the automobile engine. Therefore, when there is a problem with the car engine, if maintenance is needed, it is recommended to find a professional car repair and service agency to ensure the correct maintenance and operation of sensors and other components.

Contact Us
Phone：020-83484601